T3164 Test Tool [General]

Ver 0.01
Ή
<SET DESTINATION>
	EisB
	@s
		iXXX(A1610E) PIXUS XXXi(A1610J)Ƃĕ\B

Ver 0.02
Eop^[󎚂łȂG[C
	Hڂ͐pc[ł̂ݓK̂߁AHڂ폜B
		ȂAOł̓`FbN̎dԈĂ߁ACB
		pc[ł̂ݔfł邪AdlǂHl[00 0F 00 80(90,A0,B0)]Ń`FbNʉ߁B
		EEPROM_vAyяop^[EEPROMɂĊmFłB
ElckA1610JAA1610E\őΉB
EQƃt@CHAPSHEADER.prnǉB

Ver1.00
EȐiɑΉB
	A1610J = ip1500
	A1610E = -ip1500
	ȂA_łMDLA1610J,A1610EɂΉĂB
EH𕔂̈󎚏ԂCB

Ver1.01
EA1610E̐iC
	u-ip1500vu_ip1500vɁB

Ver1.02
E`FbNp^[ADF(12.5Duty)ɏCB
EUSBVAio[̓͂CB
	FEEPROM̎QƈʒuقȂĂB
Eq[ǧ듮CB

Ver1.03
EfoCXIĎmCB

Ver1.04
ES̔{̃Cʒu2932dot2740dotɏCB
ETestPattern2testPattern3ɕύXB


Ver1.05
EJ[mY`FbNp^[Kip^[ɕύXB
Ef̕\̎dύXB(A󎚌ʂɂ̓foCXIDf)
ECR/LF`FbNp^[̐FύXB
ELbvCsÖړ͈͂CB
EHAPSR}h̋@IDɕK0x1610͂悤ɕύXB(RomVer0.32Ή)


Ver1.06
E@ID̕ύX(RomVer0.33Ή)
	 JŁFuiP1500vuiP_1500vAEŁu_iP1500vuiP1500v

Ver1.07
ELbvCsÕCvsCB

Ver1.08
ERomVer0.35Ή
	q[gEBhEɂ郌W␳lCB

Ver1.09
EEEPROMINFOMATIONɂEEPROM̎QƈʒuCB
	W␳AvepCNʁACNʁA^Nm̃CNʁAN[jO
	@̎QƗ̈悪قȂĂB

Ver1.10
ECpCNJE^NAAvepCNJE^NA@\ǉB
ELbvCsOsĔACB

Ver1.11
EKWL苋Ă΂ȂsCB
EtB[hʂ̕sCB
	CRLF`FbNÕtB[hʂ8dot(600dpi)߁ACB

Ver1.12
ERomVer0.38Ή
	BkKip^[̕sCB

Ver1.03
ERomVer0.40Ή
	󎚃f[^̍[\̈ύXB

LVer1.03͌LBVer1.13

Ver1.14
EEEPROM INFORMATIOÑCpCNeʁAvepCNeʂύX
	g\  mg\

Ver1.15
Eq[g̕sC
	E[ړʒu@1827slits  1798slits

Ver1.16
EpCNeʂ%\̕sC
	pCNeʂMAXlقȂĂB96,000,000  136,000,000

Ver1.17
Eop^[󎚌AõW(F)-1ɐݒ肷悤ɕύXB
	̐ݒ͈󎚑OɃN[jOsA󎚌EEPROMNAsĂKݒ肳B

Ver1.18
ECpCNJE^NAAvepCNJE^NÁAlύXBEEPROM CLEAR`FbN̏l𓯗lɕύXB

Ver1.19
1) Tool has updated in accordance with the A2220 EEPROM layout
2) In HeatRun endurance mode, CR movement values has been updated with 
   new move position values(15 slits and 1808 slits)
3) In Cap and wiping endurance mode. CR movement values has been updated with 
   new move position values(1380 slit and 1950 slits) 
4) "Lock Release" has implemented for the destination settings 
5) Destination setting has incorported for the A2220 printer model 
6) EEPROMInformation window incorported for new specification
	a) USB serial number  displays in 6 digit number (convert the 3 byte no to 6 digit no)
	b) Main waist ink max ink count has changed--134,400 000
	c) Platen  waist ink max ink count  has changed ---7,120,000
	d) Added Separate head attached frequency for back and color
	c) Added cash regi value for the "L" pattern 
7) Pattern generation has incorported for the A2220 printer model(HapsCls.cpp)

Ver1.20
	1) EEPROM pattern generation has updated to incorporte for the printing   
           Dd(%main waist ink )and Ds(%platen waist ink ) values 
        2) Following are the model Id related changes 
           For J version, "IP_2200" from IP_1500
           For E version, "IP2200"from IP1500
Ver1.21 
      Destination Setting are updated for iP2200E,iP2200J,iP1600E and 
      iP1200E
 
ver1.22
       EEPROM mapping incorporated for the new EEPROM layout changes
ver1.23
      1) verified  with ver0.16 of the firmware		
      2) For displaying the total ink ,the unit has changed from "dot" to "mg" 	 	
      3) Service call error display updated for new EEPROM layout
      4) sheet type"L" has been removed 
      5) platern and Main waist ink count values set to the zero	
ver1.24
	1) General tool (Version 1.24) has verified with Ver0.19 of the firmware	
	2)Discarding the USB Serial no if it is less than 30h logic has been removed
	3)Shipping pattern1 and pattern2 bugs are fixed and updated for the new requirement
	4)Model checking are mapped for  shipping information  area in the EEPROM 
	5)Incorporated for Head test pattern printing 
Ver1.25
	1)General tool (Version 1.25) has verified with Ver0.20 of the firmware	
	2)Pattern generation and its Layout incorporated for the new requirements(Factory specification(Rev0.03))
Ver1.26
	1)General tool (Version 1.26) has verified with Ver0.20 of the firmware	
	2)Fixed the USB Serial No printing issue(issue-if the last 4 bit is A-f its print 1);
	3)Removed the F flag setting(b-directional regi value) logic   
Ver1.27
	1)General tool(Version 1.27) has verified with Ver0.22 of the firmware	
	2)Related shippping patterns are shifted right by 1 mm 
Ver1.28
	1)General tool(Version 1.28) has verified with Ver0.29 of the firmware	
	2)Stepping pattern for black incorporated for the factory specification(Rev0.03)
 Ver1.29
	1)General tool(Version 1.29) has verified with Ver0.30 of the firmware	
	2) Following ink counts has been changed	
		a) Main waist ink max ink count from  134,400 000 to 126,400,000
		b) Platen  waist ink max ink count  from 7,120,000 to 18,900,000